This mold makes perfect round balls that you can customize what you want to include inside. It fills up to a solid ball and we recommend the use of UV resin for a crystal ball look. Add glitter, bits of tiny clay parts and anything you like!
This mold has 2 parts (top and bottom)
Please select the desired size in the drop-down menu:
5mm diameter (0.196" diameter)
10mm diameter (0.39" diameter)
15mm diameter (0.59" diameter)
20mm diameter (0.79" diameter)
25mm diameter (0.98" diameter)
30mm diameter (1.18" diameter)
Made in Japan
Material: High-quality silicone
Compatible for using with:
UV resin
2-part resin (Epoxy, Neo)
resin clay (Modena / Grace / Cosmos / EXOAK)
polymer clay (Sculpey / FIMO)
air dry or lightweight clay (Hearty, Angel clay, Mermaid clay)
Tips for maintaining life of silicone molds:
- Demold as soon as the resin is cured to help the mold last longer
- Always apply a mold release agent and let it sit on the mold for 20 to 30 minutes before putting resin into the mold
- After demolding, gently wipe the silicone mold surface that was in contact with resin previously using alcohol tissue so that there is no residual resin or paint
- Store it at room temperature away from sunlight (sunlight can break down silicone overtime)
- Avoid using a torch or fire over the resin (some people do this to remove surface bubbles) as the high temperature of a direct flame may break down the silicone
- UV-resin is preferred to epoxy as the curing time is shorter
- We highly recommend using an industrial mold release agent
- Avoid leaving resin inside the mold for too long as it will naturally degrade the silicone, especially if paint is added into the mix
This mold has 2 parts (top and bottom)
Please select the desired size in the drop-down menu:
5mm diameter (0.196" diameter)
10mm diameter (0.39" diameter)
15mm diameter (0.59" diameter)
20mm diameter (0.79" diameter)
25mm diameter (0.98" diameter)
30mm diameter (1.18" diameter)
Made in Japan
Material: High-quality silicone
Compatible for using with:
UV resin
2-part resin (Epoxy, Neo)
resin clay (Modena / Grace / Cosmos / EXOAK)
polymer clay (Sculpey / FIMO)
air dry or lightweight clay (Hearty, Angel clay, Mermaid clay)
Tips for maintaining life of silicone molds:
- Demold as soon as the resin is cured to help the mold last longer
- Always apply a mold release agent and let it sit on the mold for 20 to 30 minutes before putting resin into the mold
- After demolding, gently wipe the silicone mold surface that was in contact with resin previously using alcohol tissue so that there is no residual resin or paint
- Store it at room temperature away from sunlight (sunlight can break down silicone overtime)
- Avoid using a torch or fire over the resin (some people do this to remove surface bubbles) as the high temperature of a direct flame may break down the silicone
- UV-resin is preferred to epoxy as the curing time is shorter
- We highly recommend using an industrial mold release agent
- Avoid leaving resin inside the mold for too long as it will naturally degrade the silicone, especially if paint is added into the mix