This is a mold set consisting of:
- Chocolate Partition Box Mold
- Assorted Chocolate Designs Mold
- 2 pieces of transparent shaker film
Final size after completion:
Partition Box: approx 36 x 36 x 8mm (1.41" x 1.41" x 0.314")
Completed size of mini chocolates:
Cat chocolate approx. 8.5 x 10 x 5mm (0.33" x 0.39" x 0.196")
Heart chocolate approx. 9 x 9.5 x 5mm (0.35" x 0.37" x 0.196")
For use with UV resin and can be used with UV resin films and stickers / glitter.
Please allow for small difference in size of final product as UV resin and clay will shrink between 10% to 30% after curing / baking.
From Japan
Material: Silicone
Tips for maintaining life of silicone molds:
- Demold as soon as the resin is cured to help the mold last longer
- Always apply a mold release agent and let it sit on the mold for 20 to 30 minutes before putting resin into the mold
- After demolding, gently wipe the silicone mold surface that was in contact with resin previously using alcohol tissue so that there is no residual resin or paint
- Store it at room temperature away from sunlight (sunlight can break down silicone overtime)
- Avoid using a torch or fire over the resin (some people do this to remove surface bubbles) as the high temperature of a direct flame may break down the silicone
- UV-resin is preferred to epoxy as the curing time is shorter
- We highly recommend using an industrial mold release agent
- Avoid leaving resin inside the mold for too long as it will naturally degrade the silicone, especially if paint is added into the mix
- *The silicone mold is a consumable item. It will deteriorate with each use. The amount of wear and tear seems to vary depending on how you use it.
- Chocolate Partition Box Mold
- Assorted Chocolate Designs Mold
- 2 pieces of transparent shaker film
Final size after completion:
Partition Box: approx 36 x 36 x 8mm (1.41" x 1.41" x 0.314")
Completed size of mini chocolates:
Cat chocolate approx. 8.5 x 10 x 5mm (0.33" x 0.39" x 0.196")
Heart chocolate approx. 9 x 9.5 x 5mm (0.35" x 0.37" x 0.196")
For use with UV resin and can be used with UV resin films and stickers / glitter.
Please allow for small difference in size of final product as UV resin and clay will shrink between 10% to 30% after curing / baking.
From Japan
Material: Silicone
Tips for maintaining life of silicone molds:
- Demold as soon as the resin is cured to help the mold last longer
- Always apply a mold release agent and let it sit on the mold for 20 to 30 minutes before putting resin into the mold
- After demolding, gently wipe the silicone mold surface that was in contact with resin previously using alcohol tissue so that there is no residual resin or paint
- Store it at room temperature away from sunlight (sunlight can break down silicone overtime)
- Avoid using a torch or fire over the resin (some people do this to remove surface bubbles) as the high temperature of a direct flame may break down the silicone
- UV-resin is preferred to epoxy as the curing time is shorter
- We highly recommend using an industrial mold release agent
- Avoid leaving resin inside the mold for too long as it will naturally degrade the silicone, especially if paint is added into the mix
- *The silicone mold is a consumable item. It will deteriorate with each use. The amount of wear and tear seems to vary depending on how you use it.
Customer Reviews
Based on 2 reviews
Write a review