*Ruler in main images are in cm, not inches.
Please refer below for measurements in inches.
Limited stocks. Molds are handmade in Japan
This mold has 2 parts to make a 3D plump crescent moon!
Measurement of completed crafts:
MINI crescent moon:
1.5cm height (0.39"height)
SMALL crescent moon:
2cm height (0.787"height)
LARGE crescent moon:
3cm height (1.18" height)
Some imperfections are not defects but due to the mold-making process by hand.
It does not affect functionality or usage of the mold.
Tips for maintaining life of silicone molds:
- Demold as soon as the resin is cured to help the mold last longer
- Always apply a mold release agent and let it sit on the mold for 20 to 30 minutes before putting resin into the mold
- After demolding, gently wipe the silicone mold surface that was in contact with resin previously using alcohol tissue so that there is no residual resin or paint
- Store it at room temperature away from sunlight (sunlight can break down silicone overtime)
- Avoid using a torch or fire over the resin (some people do this to remove surface bubbles) as the high temperature of a direct flame may break down the silicone
- UV-resin is preferred to epoxy as the curing time is shorter
- We highly recommend using an industrial mold release agent
- Avoid leaving resin inside the mold for too long as it will naturally degrade the silicone, especially if paint is added into the mix